Water Treatment for warewashing equipment can be vital to the smooth operation and longevity of your warewasher. A large part of the UK has hard water resulting in limescale build up. Limescale impedes the performance of your equipment and will eventually lead to your dishwasher or glasswasher being damaged. The simplest and most common solution is to fit a commercial water softener. A number of units come with internal softeners but for those that don’t or those that need something larger, then an external water softener can be fitted. We supply a range of commercial water softeners to suit all your requirements.
Automatic Timed Water Softeners utilise a timer control system. The timer is set so the softener automatically regenerates without any operator input, usually in the early hours of the morning. The time that it regenerates can be adjusted to suit each site.
Automatic Metered Softeners are controlled by a flow meter which means it regenerates after a set number of litres flow through the water softener. This can result in a more efficient unit.
The WaterCare Automatic Pumped Softeners have an integral electronically controlled pump that is designed for low water pressure/flow applications.
Hobart Automatic Water Softeners are designed for hot or cold application. They are ideally suited for busier kitchens and are recommended for Hood dishwashers, Rack dishwashers and Utensil washers.
Manual Water Softeners are perfect as a cost effective solution for sites with lower throughput and smaller washers.
All commercial water softeners are available in a range of capacities to suit all machine and site requirements.
This 12 litre manual water softener is the recommended size for glass washers, undercounter and low volume pass through dishwashers. It is suitable for water temperatures upto approximately 15 degrees. It has a capacity of 1350 litres between regen cycles.
This 16 litre manual water softener is the recommended size for undercounter and pass through dishwashers at particularly busy sites. It is suitable for water temperatures upto approximately 15 degrees. It has a capacity of 1800 litres between regen cycles.
This 20 litre manual water softener is the recommended size for undercounter and pass through dishwashers at particularly busy sites. It is suitable for water temperatures upto approximately 15 degrees. It has a capacity of 2600 litres between regen cycles.
Automatic Duplex
Water Softener
(Hot or Cold Fill)
Hobarts automatic Duplex water softener for hot or cold water supplies. Desigined to operate in the busiest sites with Hobart larger pass through, hood and rack dishwashers.
This 8 litre commercial manual water softener is suitable for water temperatures upto approximately 15 degrees. It has 3/4 inch connection and is the recommended size for glasswashers and low volume undercounter dishwashers.
The European WaterCare CS-10 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The CS-10 is for cold water feeds and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare CS-14 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The CS-14 is for cold water feeds and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare CS-18 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The CS-18 is for cold water feeds and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare CS-23 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The CS-23 is for cold water feeds and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare CS-30 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The CS-30 is for cold water feeds and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare CS-5 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The CS-5 is for cold water feeds and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare HS-10 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The HS-10 is for hot water feeds and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare HS-14 is a metered, automatic commercial water softener and is designed for hot water feeds. It is controlled by a meter which means it regenerates after when the water level within goes below a certain level. This eliminates the need to manually rinse it. The HS-14 is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens. Learn More
£659.00£790.80
Features
Capacity: 2929 Litres
Metered controlled for efficiency
Easy to use
The European WaterCare HS-18 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The HS-18 is designed for hot water supplies and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare HS-30 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The HS-30 is designed for hot water supplies and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
The European WaterCare HS-23 is a metered, automatic commercial water softener. It is controlled by a meter which means it regenerates when the water level within goes below a certain level. This eliminates the need to manually rinse it. The HS-23 is designed for hot water supplies and is compatible with Undercounter Dishwashers as well as Hood type dishwashers making it perfectly suited for busier kitchens.
To sign up for our newsletter, please fill in the fields below and click the submit button
We'd love to send you money off vouchers, exclusive offers and notification of sales and newsletters from Eco Catering Equipment & Ecomax Catering by email. We will not share your information with anyone else and you will have the opportunity to opt out at any time.